A hybrid model for human factor analysis in process accidents: FBN-HFACS

Human factors are the largest contributing factors to unsafe operation of the chemical process systems. Conventional methods of human factor assessment are often static, unable to deal with data and model uncertainty, and to consider independencies among failure modes. To overcome the above limitations, this paper presents a hybrid dynamic human factor model considering Human Factor Analysis and Classification System (HFACS), intuitionistic fuzzy set theory, and Bayesian network. The model is tested on accident scenarios which have occurred in a hot tapping operation of a natural gas pipeline. The results demonstrate that poor occupational safety training, failure to implement risk management principles, and ignoring reporting unsafe conditions were the factors that contributed most failures causing accident. The potential risk-based safety measures for preventing similar accidents are discussed. The application of the model confirms its robustness in estimating impact rate (degree) of human factor induced failures, consideration of the conditional dependency, and a dynamic and flexible modelling structure.     

Reflections on the use of Bayesian belief networks for adaptive management

A broad range of tools are available for integrated water resource management (IWRM). In the EU research project NeWater, a hypothesis exists that IWRM cannot be realised unless current management regimes undergo a transition toward adaptive management (AM). This includes a structured process of learning, dealing with complexity, uncertainty etc. We assume that it is no longer enough for managers and tool researchers to understand the complexity and uncertainty of the outer natural system-the environment. It is just as important, to understand what goes on in the complex and uncertain participatory processes between the water managers, different stakeholders, authorities and researchers when a specific tool and process is used for environmental management. The paper revisits a case study carried out 2001-2004 where the tool Bayesian networks (BNs) was tested for groundwater management with full stakeholder involvement. With the participation of two researchers (the authors) and two water managers previously involved in the case study, a qualitative interview was prepared and carried out in June 2006. The aim of this ex-post evaluation was to capture and explore the water managers' experience with Bayesian belief networks when used for integrated and adaptive water management and provide a narrative approach for tool enhancement.     

Particulate matter exchange between atmosphere and roads surfaces in urban areas

The deposition and the re-suspension of particulate matter (PM) in urban areas are the key processes that contribute not only to stormwater pollution, but also to air pollution. However, investigation of the deposition and the re-suspension of PM is challenging because of the difficulties in distinguishing between the resuspended and the deposited PM. This study created two Bayesian Networks (BN) models to explore the deposition and the re-suspension of PM as well as the important influential factors. The outcomes of BN modelling revealed that deposition and re-suspension of PM10 occurred under both, high-traffic and low-traffic conditions, and the re-suspension of PM2.5 occurred under low-traffic conditions. The deposition of PM10 under low-volume traffic condition is 1.6 times higher than under high-volume traffic condition, which is attributed to the decrease in PM10 caused by relatively higher turbulence under high-volume traffic conditions. PM10 is more easily resuspended from road surfaces compared to PM2.5 as the particles which larger than the thickness of the laminar airflow over the road surface are more easily removed from road surfaces. The increase in wind speed contributes to the increase in PM build-up by transporting particulates from roadside areas to the road surfaces and the airborne PM2.5 and PM10 increases with the increase in relative humidity. The study outcomes provide a step improvement in the understanding of the transfer processes of PM2.5 and PM10 between atmosphere and urban road surfaces, which in turn will contribute to the effective design of mitigation measures for urban stormwater and air pollution.     

Analysis of pollutant levels in central Hong Kong applying neural network method with particle swarm optimization

Air pollution has emerged as an imminent issue in modernsociety. Prediction of pollutant levels is an importantresearch topic in atmospheric environment today. For fulfillingsuch prediction, the use of neural network (NN), and inparticular the multi-layer perceptrons, has presented to be acost-effective technique superior to traditional statisticalmethods. But their training, usually with back-propagation (BP)algorithm or other gradient algorithms, is often with certaindrawbacks, such as: 1) very slow convergence, and 2) easilygetting stuck in a local minimum. In this paper, a newlydeveloped method, particle swarm optimization (PSO) model, isadopted to train perceptrons, to predict pollutant levels, andas a result, a PSO-based neural network approach is presented. The approach is demonstrated to be feasible and effective bypredicting some real air-quality problems.     

Using improved neural network model to analyze RSP,NOx and NO2 levels in urban air in Mong Kok,Hong Kong

As the health impact of air pollutants existing in ambient addresses much attention in recent years, forecasting of airpollutant parameters becomes an important and popular topic inenvironmental science. Airborne pollution is a serious, and willbe a major problem in Hong Kong within the next few years. InHong Kong, Respirable Suspended Particulate (RSP) and NitrogenOxides NO_x and NO₂ are major air pollutants due to thedominant diesel fuel usage by public transportation and heavyvehicles. Hence, the investigation and prediction of the influence and the tendency of these pollutants are ofsignificance to public and the city image. The multi-layerperceptron (MLP) neural network is regarded as a reliable andcost-effective method to achieve such tasks. The works presentedhere involve developing an improved neural network model, whichcombines the principal component analysis (PCA) technique and theradial basis function (RBF) network, and forecasting thepollutant levels and tendencies based in the recorded data. Inthe study, the PCA is firstly used to reduce and orthogonalizethe original input variables (data), these treated variables arethen used as new input vectors in RBF neural network modelestablished for forecasting the pollutant tendencies. Comparingwith the general neural network models, the proposed modelpossesses simpler network architecture, faster training speed,and more satisfactory predicting performance. This improvedmodel is evaluated by using hourly time series of RSP, NO_x and NO₂ concentrations collected at Mong Kok Roadside Gaseous Monitory Station in Hong Kong during the year 2000. By comparing the predicted RSP, NO_x and NO₂ concentrationswith the actual data of these pollutants recorded at the monitorystation, the effectiveness of the proposed model has been proven.Therefore, in authors' opinion, the model presented in the paper is a potential tool in forecasting air quality parameters and hasadvantages over the traditional neural network methods.     

Ambient Air Quality Monitoring Network Design for Assessing Human Health Impacts from Exposures to Airborne Contaminants

Existing methods of establishing ambientair quality monitoring networks typically evaluateonly parameters related to ambient concentrations ofthe contaminant(s) of interest such as emissionsource characteristics, atmospheric transport anddispersion, secondary reactions, depositioncharacteristics, and local topography. However,adverse health risks from exposures to airbornecontaminants are a function of the contaminant andthe anatomic and physiologic characteristics of theexposed population. Thus, ambient air qualitymonitoring networks designed for the protection ofpublic health or for epidemiological studiesevaluating adverse health impacts from exposures toambient air contaminants should account for bothcontaminant characteristics and human healthparameters. A methodology has been establishedwhich optimizes ambient air quality monitoringnetworks for assessments of adverse human healthimpacts from exposures to airborne contaminants byincorporating human health risk assessmenttechniques. The use of risk assessment techniquesas the basis for designing ambient air qualitymonitoring networks will help to target limitedfinancial and human resources to evaluate humanhealth risks from exposures to airbornecontaminants.     

Determining Ecoregions for Environmental and GMO Monitoring Networks

A representative environmental monitoring network at the regional scale cannot use raster-based or random sampling designs, but requires a stratified sampling procedure integrating different information layers, and it has to occur in ecologically differing homogeneous regions (ecoregions). These we have determined using a set of spatial strata with ecological variables which we analysed with classification and regression trees (CART). We present a framework for environmental monitoring, that covers different scales, and we transfer the framework to a potential GMO (genetically modified organisms) monitoring network. We use ecoregion and other environmental strata together with existing environmental monitoring networks to determine GMO monitoring sites more precisely.     

活性污泥系统动力学模拟方法的综合分析

活性污泥法的应用现状和污水中氮磷排放标准的日益严格，使得传统数学模型已满足不了目前的要求，需要对活性污泥系统复杂的动力学规律进行有效模拟。文章在综合分析活性污泥动态模型国内外研究现状的基础上，介绍了3种占主流地位的模型：活性污泥数学模型、神经网络模型和混合模型。这3种模型在污水处理的设计、运行控制和工艺优化等方面各有其独到之处。     

Rural landscape planning case study of Nanhua State Farm

１ＩｎｔｒｏｄｕｃｔｉｏｎＨｉｇｈｌｙｐｒｏｄｕｃｔｉｖｅｌａｎｄｕｓｅｒｅｓｕｌｔｓｉｎａｃｏｎｔｉｎｕｏｕｓｃｈａｎｇｅｏｆｌａｎｄｓｃａｐｅｓｉｎｒｕｒａｌａｒｅａｓ．Ｕｎｄｅｒｔｈｅｉｍｐａｃｔｏｆｃｒｏｐｐｒｏｄｕｃｔｍａｒｋｅｔｓ，ｌａｎ...     

Sex‐specific and dose‐response relationships of urinary cobalt and molybdenum levels with glucose levels and insulin resistance in U.S. adults

Growing studies have linked metal exposure to diabetes risk. However, these studies had inconsistent results. We used a multiple linear regression model to investigate the sex-specific and dose-response associations between urinary metals (cobalt (Co) and molybdenum (Mo)) and diabetes-related indicators (fasting plasma glucose (FPG), hemoglobin A1c (HbA1c), homeostasis model assessment for insulin resistance (HOMA-IR), and insulin) in a cross-sectional study based on the United States National Health and Nutrition Examination Survey. The urinary metal concentrations of 1423 eligible individuals were stratified on the basis of the quartile distribution. Our results showed that the urinary Co level in males at the fourth quartile (Q4) was strongly correlated with increased FPG (β = 0.61, 95% CI: 0.17–1.04), HbA1c (β = 0.31, 95% CI: 0.09–0.54), insulin (β = 8.18, 95% CI: 2.84–13.52), and HOMA–IR (β = 3.42, 95% CI: 1.40–5.44) when compared with first quartile (Q1). High urinary Mo levels (Q4 vs. Q1) were associated with elevated FPG (β = 0.46, 95% CI: 0.17–0.75) and HbA1c (β = 0.27, 95% CI: 0.11–0.42) in the overall population. Positive linear dose-response associations were observed between urinary Co and insulin (P_nonlinear = 0.513) and HOMA–IR (P_nonlinear = 0.736) in males, as well as a positive linear dose-response relationship between urinary Mo and FPG (P_nonlinear = 0.826) and HbA1c (P_nonlinear = 0.376) in the overall population. Significant sex-specific and dose-response relationships were observed between urinary metals (Co and Mo) and diabetes-related indicators, and the potential mechanisms should be further investigated.